6Maker 6Maker
  • home
    • why?
    • Key point
  • Support
    • event
    • Documentations
      • Drawning bobinet classique
      • Drawing Bobinet ultimaker
      • Drawing Bobinet Bondtech
      • Installation instructions Bobinet Ultimaker and Bondtech
      • The most Uselful KIT for your roll
      • Step by Step Installation
    • Firmwares
      • Firmware Double Bobinet Ultimaker
      • Firmware UM2GO PLUS.
      • Firmware Bobinet Bondtech.
      • Firmware Bobinet Ultimaker.
  • shop
  • contact us
    • About 6Maker
    • Login
  • Français
  • 18
    Jun

    Instructions d’installation Bobinet Ultimaker et Bondtech

    Vous trouverez ici la notice de montage réalisé sur une ultimaker 2go avec une Bobinet Ultimaker. La procédure est identique pour les Bobinet Ultimaker et Bondtech. La durée de...

    Lire plus
  • 17
    Jun

    Installation instructions Bobinet Ultimaker and Bondtech

    Here you will find the assembly instructions made for a 2go ultimaker with an Ultimaker Bobinet. The procedure is the same for Ultimaker and Bondtech Bobinet. The duration of...

    Lire plus
  • 17
    Jun

    Firmware Bobinet Bondtech

    Voici les pré-requis avant l’ajout de ce firmware sur votre ultimaker 2: Télécharger la notice de montage de la Bobinet bondtech et suivre la procédure (30min). Et c’est tout!...

    Lire plus
  • 17
    Jun

    Firmware Bobinet Ultimaker

    Voici les pré-requis avant l’ajout de ce firmware sur votre ultimaker2: Télécharger la notice de montage de la Bobinet ultimaker et suivre la procédure (30min). Et c’est tout! Si...

    Lire plus
  • 31
    May

    Drawning bobinet classique

    Lire plus
  • 31
    May

    Drawing Bobinet ultimaker

    Lire plus
  • 31
    May

    Drawing Bobinet Bondtech

    Lire plus

The bobinet is the result of a growing need on the part of users to have a simpler management of their rollers for their 3D printers.
The other thing that came up was the difficulty of accessing the extruder behind the machine.
This position made it difficult to insert the wire into the extruder and the user had no way to have direct information on the state of his wire in the printing yard.

Last news

  • The most Uselful KIT for your roll
  • Step by Step Installation
© Copyright 2018 - 6Maker all rights reserved